Choose your wall size, pattern, depth, finish and slat thickness for an instant price estimate. Custom walls up to 10 × 10 m.
Taxes included. Delivery and installation not included. Final price confirmed with your quotation.
Estimate based on a typical 3 × 2.7 m wall. Smaller walls cost more per m², and walls taller than 2.7 m are quoted individually.
Want this estimate sent to your email?
We'll include your full configuration and can arrange samples.
WavySlats Price Calculator
Three patterns, up to 10 × 10 m
Every WavySlats pattern scales to your wall, from a single feature wall up to 10 × 10 m.
Available materials
Choose a real wood veneer, a painted colour or solid pine. Samples are available on request.
Veneered oak
12, 18, 25 or 38 mm
Oiled natural oak veneer that brings out the grain of the wood and gives a light, refined look.
Veneered walnut
12, 18 or 25 mm
Oiled walnut veneer with a distinctive grain and a rich, warm tone.
Painted RAL colour
12, 18, 25 or 38 mm
Three coats (one primer and two colour coats) for an even, durable finish in any RAL or brand colour.
Natural pine
33 mm
Solid pine that keeps the natural texture and character of the wood.
How to use the WavySlats price calculator
- Enter your wall size as width and height, up to 10 × 10 m. Switch between metric and imperial with the toggle.
- Choose a pattern: Sea, Rock or Sand.
- Choose the depth of the wave profile: 12 cm for a subtle relief or 22 cm for a strong three dimensional effect.
- Pick a finish (painted RAL colour, veneered oak, veneered walnut or natural pine), a colour for painted walls and a slat thickness. The available thicknesses change with the finish you select.
- Read your estimate. The calculator shows wall area, price per square metre and an estimated total including VAT. Delivery is quoted with your order.
What changes the price
Depth
The 12 cm profile gives a refined, lower relief look. The 22 cm profile creates deeper shadows and a bolder three dimensional wall, and costs a little more per square metre.
Finish
Veneered oak is usually the most affordable finish, painted RAL colours sit in the middle, and veneered walnut costs the most at the same slat thickness. Natural pine comes only in 33 mm slats.
Pattern and colour
Sea, Rock and Sand are priced the same, and so are all RAL colours, including your own brand colour.
Slat thickness
Slats run from 12 to 38 mm depending on the finish. The gap between slats equals the slat width, so thinner slats mean more slats per metre of wall and a higher price per square metre.
Wall area
Your estimate is the wall area (width times height) multiplied by the price per square metre for your chosen depth, finish and thickness. The prices per square metre are based on a typical 3 × 2.7 m wall: smaller walls cost more per square metre, and walls taller than 2.7 m are quoted individually.
Price guide (per square metre, including VAT)
| Finish | From, 12 cm | From, 22 cm |
|---|---|---|
| Painted RAL colour | 1,042 EUR | 1,385 EUR |
| Veneered oak | 881 EUR | 1,183 EUR |
| Veneered walnut | 1,174 EUR | 1,574 EUR |
| Natural pine | 1,139 EUR | 1,689 EUR |
Indicative starting prices including VAT for a typical 3 × 2.7 m wall. The exact figure depends on the slat thickness you choose. Delivery and installation are not included. Prefer a finished design? See our ready-made WavySlats walls.
Calculator FAQ
How is the WavySlats price calculated?
Wall area (width times height) is multiplied by the price per square metre for your depth, finish and slat thickness, based on a typical 3 × 2.7 m wall. Prices include VAT. Delivery and installation are quoted separately.
Do the prices include VAT?
Yes. All prices in the calculator and in the price guide include VAT. Delivery is quoted with your order.
Can I switch between metric and imperial?
Yes. Use the toggle above the dimension fields to enter your wall in metres or in feet and inches.
What patterns, finishes and colours are available?
Patterns are Sea, Rock and Sand. Finishes are painted in any RAL colour, veneered oak, veneered walnut and natural pine. Standard colours are RAL 9016 White, 9005 Black, 9023 Grey, 8014 Dark brown, 1024 Light brown, 3000 Red, 6001 Green, 5002 Blue and 4007 Purple, and other RAL or brand colours are available on request. Depth is 12 or 22 cm. Slat thickness is 12 to 38 mm for painted and veneered oak walls, 12 to 25 mm for veneered walnut and 33 mm for natural pine.
How large can a custom wall be?
We build custom WavySlats walls up to 10 × 10 m for homes and commercial projects. Send us your wall dimensions for a project quote.
Can I get samples or a formal quote?
Enter your email in the form above to receive your estimate, or contact sales@wallpanelspro.com for samples and a formal project quote.