Wooden Wall Design Decorative Panels: Reclaimed Wood, Solid Oak and Exterior Cladding
Wooden Wall Design is a European manufacturer of decorative wood wall panels made from reclaimed timber and solid oak. Unlike the majority of decorative wall panels on the market, which use MDF or HDF cores with thin veneers, Wooden Wall Design products are solid or near-solid wood throughout. The visual and tactile difference is significant and visible at close range.
The material ranges
Wall Panels Pro stocks three main material categories from the Wooden Wall Design range.
Reclaimed wood panels
Reclaimed timber panels are made from recovered wood (barn boards, industrial flooring, old-growth timber recovered from demolition) that has been cleaned, dried and machined into wall panel format. The surface carries the natural marks of age: saw cuts, weathering, colour variation across the grain. No two panels are identical. Available finishes within the reclaimed category include warm brown (brushed), silver-grey (weathered), and whitewash. Product names in this range include Amber, A Priori, Brut, Selectio, Silver, MasK, Alias, Largo, Nature, Expo and Incognito.
Solid oak 3D panels
The solid oak range uses fresh European oak machined into three-dimensional profiles: geometric cuts, bevels and reliefs that create surface texture and shadow depth. The result is a panel that reads very differently from flat planking, more architectural than rustic. Product names in this range include Ozo, Deja vu, Rubato, Dominus, ACE, Ego, Correctus and Chess.
Exterior-rated charred panels
The Exterior Latte and Exterior Espresso panels use the Shou Sugi Ban charring technique: solid timber is charred to create a carbon-rich surface layer that is naturally weather-resistant, insect-resistant and very low maintenance. These panels are tongue-and-groove format and rated for exterior cladding as well as interior use. The charred surface ranges from deep brown-black (Espresso) to a lighter carbonised finish (Latte).
Solid wood versus veneer: what actually differs
Veneer panels (MDF or HDF core with a thin wood layer) look similar to solid panels in photographs. In person, the difference is in edge profiles, ageing behaviour and surface depth. Veneers are 0.3 to 1mm of wood over an engineered substrate. Wooden Wall Design panels are solid or near-solid throughout. Over years of installation, veneered products tend to show substrate at corners and cut edges; solid panels age consistently. The surface of a solid reclaimed panel has three-dimensional texture from natural weathering that a veneer cannot replicate.
Where to use each panel type
Reclaimed wood panels work best where warmth and character are the design intent: feature walls in living rooms and bedrooms, restaurant interiors, boutique hotel rooms, office reception areas where the material choice signals something about the brand. The aged, irregular quality of reclaimed wood contrasts well with clean modern architecture.
Solid oak 3D panels suit more formal or architectural interiors: hallways, high-end residential feature walls, hospitality spaces where the geometry of the surface detail matters. They pair well with stone, concrete and polished plaster.
Exterior charred panels are the correct choice for external cladding, covered terraces, garden rooms and any application where weather exposure is possible. They are also visually distinctive inside, particularly in interiors that reference industrial or Japanese aesthetics.
Installation and dimensions
Wooden Wall Design panels install on standard timber battening or directly to flat walls with construction adhesive and pins. Panels are available in tongue-and-groove and flat-edge profiles; the former provides a tighter joint for feature wall installations. Standard panel lengths vary by product; widths are typically 100 to 200mm per board. Contact Wall Panels Pro for the specific dimensions of each product before ordering for exact coverage calculations.
Frequently asked questions
What is the difference between reclaimed and fresh-cut wood panels?
Reclaimed panels use timber recovered from previous use: barns, factories, old buildings. The wood has already gone through its natural movement and drying cycles, making it dimensionally more stable than fresh-cut timber. The surface carries visible history: colour gradients, saw marks, nail holes. Fresh-cut panels have a uniform, predictable appearance. Which is preferable depends entirely on the aesthetic intent of the project.
Are Wooden Wall Design panels suitable for bathrooms?
The reclaimed and solid oak interior panels are not rated for wet environments. For bathrooms, specify the exterior-rated charred panels (Latte or Espresso), which have a moisture-resistant charred surface layer, or choose an alternative material. In bathrooms with good ventilation and no direct water contact, interior panels can be used with appropriate finishing, but this is not covered by the standard product warranty.
How do I clean reclaimed wood panels?
Dust with a dry or slightly damp cloth along the grain. Avoid saturating the surface. Do not use solvent-based or abrasive cleaners. Reclaimed timber panels with an oil or wax finish can be refreshed with the appropriate oil or wax product applied sparingly once or twice a year.
Do the panels come pre-finished?
Yes. All panels are supplied ready to install with their specified finish applied. No on-site finishing is required unless the customer chooses to modify the finish after installation.
Can Wooden Wall Design panels be used as exterior cladding?
Only the Exterior Latte and Exterior Espresso (charred Shou Sugi Ban) variants are rated for exterior use. All other products in the range are for interior installation only.
Do you ship Wooden Wall Design panels across Europe?
Yes. Wall Panels Pro ships the full Wooden Wall Design range across continental Europe, the UK, Norway and Switzerland. Delivery typically takes 5 to 10 business days depending on destination and order volume.
What is Shou Sugi Ban?
Shou Sugi Ban is a Japanese wood preservation technique in which the surface of solid timber is charred using an open flame. The charring creates a carbon layer that is naturally resistant to moisture, insects and UV degradation. The technique has been used for centuries in Japan for exterior cladding and has been adopted widely in contemporary European architecture and interior design for its durability and distinctive visual character.