Tiled wall finished with PERMACOLOR grout
Laticrete · PERMACOLOR · 29 Colours

Accessories to finish your installation

Professional grout and jointing products chosen to pair with our PHOMI MCM and flexible tiles. Right now: PERMACOLOR cement grout by Laticrete, in 29 colours.

29
Grout colours
2.5 kg
Pack size
EN 13888
CG2 WA certified
In & Out
Walls and floors
Laticrete quality
Polymer modified
Stain and efflorescence resistant
Colour matched to your tiles
Ships across the EU

No products found
Use fewer filters or remove all

PERMACOLOR cement grout pack
About the accessories

The right grout makes the finish

A tile is only as good as the joint around it. PERMACOLOR by Laticrete is a high performance, polymer modified cement grout that gives clean, consistent colour and a hard, durable joint for walls and floors, indoors and out.

We carry it because it pairs beautifully with our PHOMI MCM and flexible stone and ceramic tiles. With 29 colours you can match the joint to the tile for a seamless look, or contrast it to make every piece stand out.

This is the start of our accessories range. Fixings and fittings for our WWCB acoustic panels are coming next.

Product Details

Product

PERMACOLOR cement grout by Laticrete. Polymer modified for strength and colour consistency.

Standard

EN 13888 CG2 WA classified cement grout with reduced water absorption.

Pack size

2.5 kg resealable pack. Coverage depends on tile size and joint width.

Colours

29 colours in stock, from soft neutrals to deep tones. Choose your colour at checkout.

Where to use

Walls and floors, indoors and outdoors. Suitable for residential and commercial projects.

Pairs with

PHOMI MCM, flexible stone and flexible ceramic tiles from our range.

How to Grout

1
Prepare: Let the tile adhesive cure fully. Make sure joints are clean, even and free of dust and debris.
2
Mix: Add the powder to clean water and mix to a smooth, lump free paste. Let it slake for a few minutes, then mix again.
3
Apply: Spread diagonally across the joints with a rubber float, pressing firmly to fill them completely.
4
Tool the joints: Remove excess and shape the joint before the grout starts to set.
5
Clean: Wipe the tile face with a damp sponge in a circular motion. Rinse often and buff off any haze once dry.
6
Cure: Protect the joints from water and traffic while the grout cures. Always follow the Laticrete data sheet for your conditions.

Frequently Asked Questions

Which grout should I use for MCM and flexible tiles?

PERMACOLOR cement grout is our recommended choice. It is polymer modified, colour stable and suits the thin joints typical of PHOMI MCM and flexible tile installations.

How much grout do I need?

Coverage depends on tile size and joint width. Tell us your tile and project size and we will help you estimate the number of packs.

Can I use it outdoors?

Yes. PERMACOLOR is rated for walls and floors, indoors and outdoors, when installed and cured to the manufacturer guidelines.

How do I choose a colour?

There are 29 colours. Match the joint to your tile for a seamless look or pick a contrast tone to define each piece. Ask us for guidance if you are unsure.

Do you sell adhesives and other accessories?

Grout is our first accessory. Fixings and fittings for our WWCB acoustic panels are coming soon. Contact us if you need something specific in the meantime.

Planning a project?

Tell us your tile and the area you are covering, and we will help you choose the right colour and quantity.