GRS Certified
Recycled PET felt backing
12h response
Quote or custom order
Ships to 27 countries
DDP available
Samples first
Before bulk orders
6 EU warehouses
Fast local dispatch
Not sure which finish? Request a physical panel sample before ordering — contact us and we'll send a sample within 3–5 business days.
→ Request a sample
Technical specifications
Material
Veneered MDF
Standard sizes
600 × 600 · 2400 × 600 · 2780 × 600 · 2970 × 600 mm · Other sizes on request
Thickness
20 mm total (13 mm slats + 7 mm felt backing)
Backing material
GRS certified recycled PET felt
Min. order
Minimum 2 panels
Application
Interior walls & ceilings
Acoustic performance
NRC 0.65–0.85
GRS Certified felt
Finishing options
Lacquer or oil finish available on request
PRICE PER SIZE:
- 600 × 600 mm - €35,99/sheet (€99,97/m²)
- 1200 × 600 mm - €69,99/sheet (€97,21/m²)
- 2400 × 600 mm - €129,99/sheet (€90,27/m²)
- 2800 × 600 mm - €139,99/sheet (€83,33/m²)
The polyester used for the product's foundation is 7 or 9 mm thick, available in black or gray, and is recycled plastic. This material is approved to fulfill the Global Recycle Standard (GRS) specifications and is free of dangerous ingredients, including pentachlorophenol and formaldehyde. It also falls under class B-s1, d0, which is fire-resistant.
The veneered MDF slats, measuring 12 mm in thickness, are attached to the polyester foundation to form the decorative portion of the wooden panel. The MDF slat is categorized as fire-resistant under class B-s1, d0, and measures between 2400 and 2800 mm in length and 27 mm in width. Veneer is used to cover the MDF slats; the buyer can select and approve the veneer.
1
Surface prep: Wall must be clean, dry, and flat. Suitable for plasterboard, concrete, brick, and timber stud walls. Ensure surface is level — panels will follow any unevenness.
2
Acclimatise: Leave panels in the installation room for 24–48 hours before fitting. Wood veneer expands and contracts with humidity — this prevents warping after installation.
3
Fixing method: Three options — construction adhesive (MS polymer or PU), concealed clip system, or direct screw through felt backing into studs. Adhesive gives cleanest finish; clips allow future removal.
4
Layout & cutting: Plan panel layout before fixing. Cut with fine-tooth hand saw, circular saw, or mitre saw. Always cut from the wood face side down to prevent tear-out on the visible surface.
5
Finishing: Panels arrive ready to install — no staining, sealing or finishing required. For walls near moisture (bathrooms, kitchens), apply a thin coat of wood wax or oil to the veneer surface before installation.
Need a full installation guide PDF? Contact us— we'll send it with your sample order.
The PET felt backing is GRS (Global Recycled Standard) certified — made from post-consumer recycled plastic bottles. Using recycled felt instead of virgin materials significantly reduces embodied carbon compared to conventional acoustic products.
- GRS certified recycled PET felt backing
- Natural wood veneer — responsibly sourced
- No formaldehyde or harmful adhesives
- Low VOC — safe for indoor air quality
- Long lifespan — reduces replacement waste
- Panels can be removed and reused
Panel sizes & custom cutting
Standard panel width is 600 mm. Available heights: 600 · 2400 · 2780 · 2970 mm. Any custom height between 500–2970 mm is available on request — panels are cut to your exact wall height and priced at the next standard size up.
Request custom size or project quote →
Large order or project inquiry
Reply within 12h
