• Stiga RM film faced birch plywood, smooth dark brown phenolic film
1 1

Stiga RM

Stiga RM Film Faced Birch Plywood F/F · 1250 × 2500 mm

€56,20 EUR
Tartalmazza az adókat. A szállítási költséget a megrendeléskor számítjuk ki.
Thickness

INDICATIVE PRICE PER SHEET (EXW Latvia, half-truck minimum):

  1. 15 mm - €56,20/sheet (pack of 50 = €2.810,00)
  2. 18 mm - €63,85/sheet (pack of 40 = €2.554,00)
  3. 21 mm - €74,50/sheet (pack of 35 = €2.607,50)

Prices per sheet excluding VAT, EXW Latvia; transport quoted separately or arranged by the buyer. Minimum order: half a truck load (about 8 packs, 18 m³). Full trucks, larger volumes, other thicknesses or grades: contact us for a project price.

100% birch plywood with smooth dark-brown phenolic film on both faces from the Stiga RM mill in Kuldīga, Latvia. The film gives a hard, water-repellent, easy-to-clean surface that releases cleanly from concrete and resists wear. Cross-bonded 1.5 mm birch veneers, phenolic (WBP) glue, formaldehyde class E1, produced to EN 636-3S for exterior and humid conditions, edges sealed with water-resistant paint.

What the grade means

F/F means smooth film on both faces. Standard film grade F1 allows minor film stains on up to 15% of the surface, small matte areas and no delamination; lower F2 grade is available for rough work on request. Film weight 120 g/m² as standard, 220 g/m² on request for more reuses.

Typical uses

Concrete formwork and shuttering systems, scaffolding decks, transport and trailer linings, construction site platforms, workshop benches and any surface that must stand up to water, concrete and repeated use.

Technical Specifications

Material 100% birch veneer, cross grain
Surface Smooth phenolic film both sides, dark brown, 120 g/m² (220 g/m² on request)
Edges Sealed with water-resistant paint
Glue and standard Phenol formaldehyde (WBP), E1, EN 636-3S
Veneer thickness 1.5 mm
Sheet size 1250 × 2500 mm (1220 × 2440 mm on request)
Thicknesses listed 15 / 18 / 21 mm (6.5 to 35 mm on request)
Thickness tolerance 15 mm: 14.3 to 15.3 · 18 mm: 17.1 to 18.7 · 21 mm: 20.0 to 21.5
Density approx. 680 kg/m³
Moisture content 10% ± 2%
Sheet weight approx. 32 / 38 / 45 kg
Pack size 50 / 40 / 35 sheets (2.34 / 2.25 / 2.30 m³)
Formaldehyde E1 (EN 717-1), CARB Phase 2, TSCA Title VI

Certifications

  • PEFC Chain of Custody (FSC Mix available on request, surcharge applies)
  • CE marking per EN 13986 and UKCA
  • CARB Phase 2 and EPA TSCA Title VI
  • E1 (EN 717-1)
  • Environmental Product Declaration for film-faced plywood · REACH compliant

Ordering

Prices shown are indicative, per sheet, EXW Latvia (ex works, transport not included) and apply to the minimum order of half a truck load: about 8 packs, roughly 18 m³ or 12.5 tonnes. The mill produces to order and holds no stock: production takes up to 3 weeks depending on season, plus transit. Mixing thicknesses and grades within one load is confirmed at quotation. We quote full truck loads across Europe and container loads worldwide, as well as other thicknesses, 220 g film, the 1220 × 2440 mm format or FSC-certified material: contact us for a project price. Larger volumes are priced lower.

Minden részlet megtekintése
Stiga RM Film Faced Birch Plywood F/F · 1250 × 2500 mm
€56,20
Get a quote Checkout →

Contact form