GRS Certified
Recycled PET felt backing
12h response
Quote or custom order
Ships to 27 countries
DDP available
Samples first
Before bulk orders
6 EU warehouses
Fast local dispatch
Not sure which finish? Request a physical panel sample before ordering — contact us and we'll send a sample within 3–5 business days.
→ Request a sample
Technical specifications
Material
Veneered MDF
Standard sizes
600 × 600 · 2400 × 600 · 2780 × 600 · 2970 × 600 mm · Other sizes on request
Thickness
20 mm total (13 mm slats + 7 mm felt backing)
Backing material
GRS certified recycled PET felt
Min. order
Minimum 2 panels
Application
Interior walls & ceilings
Acoustic performance
NRC 0.65–0.85
GRS Certified felt
Finishing options
Lacquer or oil finish available on request
HINTA KOON MUKAAN:
- 600 × 600 mm — €35,99/levy (€99,97/m²)
- 1200 × 600 mm — €69,99/levy (€97,21/m²)
- 2400 × 600 mm — €129,99/levy (€90,27/m²)
- 2800 × 600 mm — €139,99/levy (€83,33/m²)
Tuotteen pohjamateriaalina käytettävä polyesteri on 7 tai 9 mm paksu, saatavana mustana tai harmaana, ja se on valmistettu kierrätetystä muovista. Tämä materiaali on hyväksytty täyttämään Global Recycle Standard (GRS) -vaatimukset ja se on vapaa vaarallisista aineista, mukaan lukien pentaklorifenoli ja formaldehydi. Se kuuluu myös luokkaan B-s1, d0, joka on palonkestävä.
Viilutetut MDF-listat, joiden paksuus on 12 mm, on kiinnitetty polyesteripohjaan ja muodostavat puupaneelin dekoratiivisen osan. MDF-lista on luokiteltu palonkestäväksi luokan B-s1, d0 mukaisesti, ja sen pituus on 2400–2800 mm ja leveys 27 mm. Viilua käytetään MDF-listojen päällystamiseen; ostaja voi valita ja hyväksyä viilun.
1
Surface prep: Wall must be clean, dry, and flat. Suitable for plasterboard, concrete, brick, and timber stud walls. Ensure surface is level — panels will follow any unevenness.
2
Acclimatise: Leave panels in the installation room for 24–48 hours before fitting. Wood veneer expands and contracts with humidity — this prevents warping after installation.
3
Fixing method: Three options — construction adhesive (MS polymer or PU), concealed clip system, or direct screw through felt backing into studs. Adhesive gives cleanest finish; clips allow future removal.
4
Layout & cutting: Plan panel layout before fixing. Cut with fine-tooth hand saw, circular saw, or mitre saw. Always cut from the wood face side down to prevent tear-out on the visible surface.
5
Finishing: Panels arrive ready to install — no staining, sealing or finishing required. For walls near moisture (bathrooms, kitchens), apply a thin coat of wood wax or oil to the veneer surface before installation.
Need a full installation guide PDF? Contact us— we'll send it with your sample order.
The PET felt backing is GRS (Global Recycled Standard) certified — made from post-consumer recycled plastic bottles. Using recycled felt instead of virgin materials significantly reduces embodied carbon compared to conventional acoustic products.
- GRS certified recycled PET felt backing
- Natural wood veneer — responsibly sourced
- No formaldehyde or harmful adhesives
- Low VOC — safe for indoor air quality
- Long lifespan — reduces replacement waste
- Panels can be removed and reused
Panel sizes & custom cutting
Standard panel width is 600 mm. Available heights: 600 · 2400 · 2780 · 2970 mm. Any custom height between 500–2970 mm is available on request — panels are cut to your exact wall height and priced at the next standard size up.
Request custom size or project quote →
Large order or project inquiry
Reply within 12h
