WallpanelsPRO

Drewniany panel akustyczny Hexa Oak

Name: Drewniany panel akustyczny Hexa Oak
Brand: Wall Panels Pro
SKU: 11942882
Price: 38.85 EUR
Availability: InStock

€38,85 EUR

W promocji Wyprzedane

Z wliczonymi podatkami. Koszt wysyłki obliczony przy realizacji zakupu.

Size Oak wooden acoustic panel on gray felt 670 x 580 x 20 mm (0.39 m2)

CENA ZA ROZMIAR:

670 × 580 mm: 38,85 €/arkusz (99,97 €/m²)

Panele akustyczne z listew drewnianych WallpanelsPRO łączą redukcję hałasu ze stylowym, naturalnym wyglądem. Stworzone, aby minimalizować echo i tworzyć spokojniejsze pomieszczenia, panele te mogą być wykonywane na wymiar o długości do 297 cm.

Pokaż kompletne dane

Drewniany panel akustyczny Hexa Oak

€38,85 / panel

Get a quote Checkout →

GRS Certified Recycled PET felt backing

12h response Quote or custom order

Ships to 27 countries DDP available

Samples first Before bulk orders

6 EU warehouses Fast local dispatch

Not sure which finish? Request a physical panel sample before ordering — contact us and we'll send a sample within 3–5 business days. → Request a sample

Material Veneered MDF

Standard sizes 600 × 600 · 2400 × 600 · 2780 × 600 · 2970 × 600 mm · Other sizes on request

Thickness 20 mm total (13 mm slats + 7 mm felt backing)

Backing material GRS certified recycled PET felt

Min. order Minimum 2 panels

Application Interior walls & ceilings

Acoustic performance NRC 0.65–0.85 GRS Certified felt

Finishing options Lacquer or oil finish available on request

CENA ZA ROZMIAR:

670 × 580 mm: 38,85 €/arkusz (99,97 €/m²)

Surface prep: Wall must be clean, dry, and flat. Suitable for plasterboard, concrete, brick, and timber stud walls. Ensure surface is level — panels will follow any unevenness.

Acclimatise: Leave panels in the installation room for 24–48 hours before fitting. Wood veneer expands and contracts with humidity — this prevents warping after installation.

Fixing method: Three options — construction adhesive (MS polymer or PU), concealed clip system, or direct screw through felt backing into studs. Adhesive gives cleanest finish; clips allow future removal.

Layout & cutting: Plan panel layout before fixing. Cut with fine-tooth hand saw, circular saw, or mitre saw. Always cut from the wood face side down to prevent tear-out on the visible surface.

Finishing: Panels arrive ready to install — no staining, sealing or finishing required. For walls near moisture (bathrooms, kitchens), apply a thin coat of wood wax or oil to the veneer surface before installation.

Need a full installation guide PDF? Contact us— we'll send it with your sample order.

The PET felt backing is GRS (Global Recycled Standard) certified — made from post-consumer recycled plastic bottles. Using recycled felt instead of virgin materials significantly reduces embodied carbon compared to conventional acoustic products.

GRS certified recycled PET felt backing
Natural wood veneer — responsibly sourced
No formaldehyde or harmful adhesives
Low VOC — safe for indoor air quality
Long lifespan — reduces replacement waste
Panels can be removed and reused

Panel sizes & custom cutting

Standard panel width is 600 mm. Available heights: 600 · 2400 · 2780 · 2970 mm. Any custom height between 500–2970 mm is available on request — panels are cut to your exact wall height and priced at the next standard size up.

Request custom size or project quote →

Twój koszyk jest pusty

Twój koszyk

Przewidywana suma

Drewniany panel akustyczny Hexa Oak

Contact form

Kraj/region

Język